Wednesday, June 29, 2011

The "Why" Part of the Brain

   In my world, creativity is directly related to my state of mind or mood.  Some days, I'm seemingly unable to engage the necessary faculties to produce innovative designs. I'm not sure why this is, but I recognise it and adapt. I shift gears and go into manufacture mode and pump out all the small jobs that don't need creative attention. Occasionally, a conversation or event can alter the current mood and allow me to dive headlong into an idea or design development. Why? 
   It's an ironic control issue. The more I try to drive my brain in a direction, it seemingly applies the break, slowing the process. If I leave it to drive itself, it sometimes drives erratically, forcing a countering action. Some days creativity seems to be in a glider plane on autopilot, starting from a lofty point, then gracefully meandering to the obvious destination. Why?
   Some nights I go to sleep with a problem I wish to solve. A very sound rest occurs and the problem pops into my head as if the hand of god placed it there. Other times, I dream of a problem as if it were a tin can that I kick around until it's unrecognisable. I assume that there's many factors related to sleep that contribute to those questions. But why?
  I guess there's no clear conclusions for these questions. The billions of neurons  fire like a lightning storm in my head can't construct the reasons, but if I can just help guide the outcome, I will deal with it.
  

Tuesday, June 28, 2011

Frankenprinter

   Back after major surgery and a glimpse of hardware heaven, the big printer is back and ready to print to the best of it's ability. He's been transplanted with a few custom fitted parts especially designed to replace flawed engineering. 
   Amazingly enough, I managed to guess the correct specs on a gear that had melted away due to a leaky hose union. Who would think to use a plastic that's adversely effected by the actual ink that the machine uses? I, in turn decided to replace it with an aluminium gear that will not deteriorate under those conditions. Although, the new pump I installed has an updated connection designed not to leak. Thankfully that shouldn't ever be an issue again. Oddly though, the new pump did cause another unfortunate problem. The gear that I replaced still had the original hub with a plastic nipple that seated into a plastic dimple. I noticed that the connection was a bit snug so I sanded it down a smidge and added a bit of lube to attempt to remedy the issue. As it turned out, it didn't work. It melted the nipple clean off, welding itself into the female recipient, while spinning the gear loose. The whole lot was then replaced with an aluminium rivit, ground down to fit the socket. Dr. Frankenstein- eat your heart out!
   Once I made the decision to resurrect the anaemic beast, I through all of my McGyver skills at it. Thank goodness my new friend Tony was there to lend a helping hand and some good ideas. His knowledge about printers makes me look like a caveman.
  To wrap this laborious story up:
The monster has awakened from it's slumber, to slave and encumber. Ink flows through it's veins, no more will it strain, to decipher the binary numbers.

Monday, June 27, 2011

Referbished: An Update

   It's always nice to put projects to bed. Especially the ones that have caused brain-strain throughout the process.
   Roger from Roger's Hair Craft in Lakeville came to pick up his referbished carved redwood with 23k gold leaf lettering today. He seemed pleased with the outcome. I saw it for the first time in the daylight and the gold damn near blinded me in one eye!
   This project wasn't as bad as I projected. Mainly because Bruce and his magic brushes performed so precisely. Plus, the original paint was in decent shape and it brightened right back up with a little elbow-grease.
The installation was done by his crack remodelling team who did a splendid job with the siding. An excellent choice of color I might add. It accentuated the sign's tones quite well. I would have liked to see the brackets hidden however, but it's too late for that- the holes have been made. Other than that small detail, I'm delighted with the finally (the payment has already been deposited). Thanks Roger and thanks Bruce of the help. Another project laid to rest. Can't wait to see what he does with the other repaint project. That's for another posting. Go Bruce!

Friday, June 24, 2011

Here's to You, Heroic Hammer Monkeys

  When it rains it most defiantly pours! The Gym floor decorating business is in full swing. WNY Floor Co. has been piling on me the last three weeks. A few little quickies, but one whale of a job which I came close to completing today.
  What a fun challenge this bugger has been. I've had to pull out some old tricks and a few new ones to make this happen. The biggest challenges are yet to rear their ugly heads though. The task of actually installing those massive panels of paint mask intended to flank the multi-colored floor adornment. I thank my lucky stars I'm not the craftsmen destined for that task. I will, however be handy at the end of a smart phone, ready to field a barrage of questions pertaining to the specifics of this manifestation. Don't get me wrong, I'm there in spirit. In fact, I've already been there-- in my mind. This has all been virtually constructed using several methods. I've been over it time and time again- trying to work out the kinks and pitfalls.
   Kudos to the hammer monkeys in the field. These guys translate all my scribbled nonsense into time transcending artwork, worthy of television time. My only regret within this process, is that I never get to at least shake those men's hands for their exocutionary prowess. Cheers my mythical heroes. You have your work cut out for you!

Thursday, June 23, 2011

Go Cart, Go!

   Involvement in community seems to be of utmost importance to many of my fellow business owneres in this area. They all tend to practice shopping locally and encourage others do do the same. I certainly concur. Without that type of loyalty, we would leave it all to the big companies, possibly located outside our state, or worse, outside our country. The trick is to entice the residence to adhere to the same mindset.
   Recently my neighbours purchased 8 new go-carts for their mini-amusement park operation. They were very intent on decorating them as soon as possible. After learning of their intentions, it dawned on me that they might be missing out on a golden opportunity to involve the community and incidentally earn a few duckets to put into the new rigs. Currently I'm concocting a proposal that will bring this entertaining pass-time together with local commerce.
   The rest of the story is yet to be told. What I can say is that there is plenty of interest around town in cart sponsorship. With any luck it will generate a buzz worthy of a waiting list and a renewed commitment to small town shops. Vrooom... let's go!

Wednesday, June 22, 2011

The Man with the Golden Brushes

   It's important to know One's limits and understand that sometimes it's better to hire an expert for a task that may take One longer to accomplish alone.
   That's exactly what I did today. I called upon a fellow sign maker, or perhaps more accurately, a sign painter. Bruce has been spending most of his time painting homes rather than signs lately so he was he was happy to use a rainy day to get back to his roots.
   A few days ago I wrote about a couple of restoration projects I decided to take on. Well, time has become a factor so I decided to ask for a little help. Bruce came through with his case of fine brushes to add the sizing (or glue) necessary for me to add the new gold leaf to the nice old carved sign. After spending a good bit of time washing and preparing, he got right to it.
  I was surprised that the process took as long as it did, but I'm glad that he took the time to do it right. Tomorrow I will apply the gold and see the true skills that brought to the table. Thanks Bruce!

Tuesday, June 21, 2011

Old Dog, Old Tricks

   Approximately 28 years ago, I learned how to plot provided points onto a home made grid with the intent drawing some sort of silly cartoon character. Who knew that there was actually some validity to that exercise rather than a middle school afternoon time filler. I was able to apply it to my work in effect further my existence.
   I pride myself upon having a full bag of tricks. It's necessary to constantly compile techniques and information if I want to stay competitive while working with many varieties of media and materials. Who knows when I will need to reach into that bag. It's just been a while since I've had to reach that deep down.
   The purpose behind this method is to take a small graphic and make it larger. In this case I'm able to use the computer to scale up the artwork then build the grid over it. Once I accomplished that I was able to precisely pinpoint the location of a series of arks that create the majority of the perimeter of the drawing.
   I can't help to be profoundly hopeful of the success of this project. Thank you to my 6th grade teacher for introducing my to graph paper.